Burner Operation - Riello RS 300/E BLU Installation, Use And Maintenance Instructions

BURNER OPERATION (A)
NORMAL FIRING
(seconds)
1 - Thermostat
2 - Motor
3 - Air gate valve
4 - Ignition transformer
5 - Valve pilot
6 - Main valve
7 - Flame
8 - Lock-out
BURNER FLAME GOES OUT DURING OPER-
ATION
If the flame should accidentally go out during
operation, the burner will lock out within 1s.
To check the full operating programme, refer to
the LMV instrument reference handbook, sup-
plied during the technical service training.
TROUBLESHOOTING
The instrument supplied features a diagnostics
function through which any causes of malfunc-
tioning are easily identified.
D3804
To consult the full list, refer to the instrument ref-
erence handbook, supplied during the technical
NO FIRING
service training.
D3805
(A)
14