K-array Azimut Series User Manual page 19

In order to customize the action associated to the four
programmable buttons:
1. Select the button you want to program and set the proper action
among the one listed in the table below.
2. Some actions require you to define the argument of the setting (e.g. the
volume) in the PUT Data field. If not required, leave this field empty.
3. Enable the button to make it active.
Description
Mute ON
Mute OFF
Set volume at value # (span from -90 to 12)
Volume UP
Volume DOWN
Start playback
Pause playback
Skip backward
Skip forward
Set standby ON
Set standby OFF
Set the device as SLAVE in a local streaming network
Release the device from the local streaming network
Azimut
Set the device as MASTER in a local streaming network Back
Release the local streaming network
General
192.168.10.1
Custom Button A
Enabled
/api/v1/tas/standby
Action URL
{"mute": true }
PUT Data (leave empty for GET requests)
Custom Button B
Enabled
Action URL
Action
/api/v1/dsp/main/mute
/api/v1/dsp/main/mute
/api/v1/dsp/main/volume
/api/v1/dsp/main/volume/up
/api/v1/dsp/main/volume/up
/api/v1/player/play
/api/v1/player/pause
/api/v1/player/prev
/api/v1/player/next
/api/v1/tas/standby
/api/v1/tas/standby
/api/v1/multiroom/slave
/api/v1/multiroom/slave
Settings /api/v1/multiroom/master
/api/v1/multiroom/master
You can eventually control a different device within the
network setting preceding the action string with the IP
address of the target device; e.g. pause playback of the
device with IP 192.168.10.100:
http://192.168.10.100/api/v1/player/pause
PUT data
{"mute": true }
{"mute": false }
{"volume": # }
{}
{}
{"mute": true }
{"mute": false }
{"slave": true}
{"slave": false}
{"master": true}
{"master": false}
Azimut
User Guide
17