HP ProLiant MicroServer Maintenance And Service Manual page 45

Connect the Mini SAS cable, LED cable and two USB cables to connectors on system board.
3.
Connect the power cable and fan cable to connectors on system board.
4.
Completely push the system tray into the server.
5.
Place the power cable under the tray handle in the server. Put the power cable and fan cable
6.
together inside the left cable clamp of the chassis.
Lock the cable clamp to secure the power cable and fan cable.
7.
Place the LED cable and two USB cables in the server and also put them together inside the right
8.
cable clamp of the chassis.
Lock the cable clamp to secure those cables together.
9.
Fasten the two thumb screws on both sides.
10.
Removal and replacement procedures 45