Table of Contents
Advertisement
6
6-14 Advanced Features of DocBuilder Pro
Finishing settings
In the Finishing pane, you can specify binding and gang printing settings.
Binding
To enable binding settings and disable gang printing, select Binding. When binding
settings are enabled, you can specify the binding method, the binding edge of each
page (left or right), and the number of pages per saddle group. DocBuilder Pro
compensates automatically for binder's creep according to the specified binding
method, the number of pages in a saddle group, the layout in use, and the size of the
job.
If you are using a layout with more than two columns or rows, the Binding
N
:
OTE
selection is unavailable.
You can specify the following binding edge options:
—Specifies binding across the left edge of the booklet. The booklet reads
Left Edge
from left to right.
—Specifies binding across the right edge of the booklet. The booklet reads
Right Edge
from right to left.
You can specify any of the following binding methods:
—Specifies a group of folded sheets stitched or stapled on a common, centered
Saddle
fold line. Saddle-stitched binding is the most common type of binding, and is usually
used for booklets.
Advertisement
Table of Contents
