Table of Contents
Advertisement
7
7-5 Tracking and managing jobs with Fiery Spooler
Choose this command
from the Job menu
Duplicate Job(s)
Rename
Hold
RIP and Hold
Print
Print and Hold
(like the PPD option
Save Fast Reprint)
Process Next
Remove Raster
Override Print Settings
To do this
Duplicate one or more selected PostScript or
PCL data jobs in the Spool or Print areas
(creates a reference to the original job, with
the same name).
Rename the job (PostScript or PCL file with
or without raster).
Hold the job in the current place (except for
a printed job, which is moved to the Spool
or RIP area).
RIP the job and hold it in the RIP area.
Print the job in its turn (RIP the job first if it
does not have raster data). Keep the printed
job in the Print area until the job limit is
reached.
Print the job in its turn (RIP the job first if it
does not have raster data).
After printing, hold the PostScript or PCL
data and the raster in the RIP area.
Give top priority to this job.
Print the job (or RIP and print) as soon as
the processor and copier/printer are free,
before other waiting jobs.
Remove the raster from a job that has raster
data; leave the PostScript or PCL job in
place.
Change the print options for the job
(see
page
7-6).
Raster data is
n/a
(Duplicate is not available for raster jobs.)
Unaffected, but associated with the new
name
Held in RIP area indefinitely, if included
with job
Held in RIP area indefinitely
Temporarily held on the server until the job
has completed printing
Held in the RIP area indefinitely (saved to
disk)
Held in RAM after printing (can be selected
in the Print area while it remains there), or
held in RIP area (saved to disk) if
destination was RIP and Hold
Deleted
Deleted and regenerated, if the newly
selected options require reRIPping, or
reprinted with the new settings, if none
require reRIPping
Advertisement
Table of Contents
