[Administration] Tab; Network Settings - Toshiba E-STUDIO2010AC Operator's Manual

[Administration] Tab

0.
 Network settings
 Setting up SMB
In SMB, you can specify the SMB network properties to access this equipment through a Microsoft Windows Network
and enable SMB printing. When you enable the SMB, users can also browse the local folder in the equipment. You can
also specify the WINS server when the WINS server is used to enable the Windows print sharing and Windows file
sharing services between the different subnets.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Item name
1 SMB Server Protocol
2 SMB 1.0 Support For Server
3 SMB 1.0 Support For Client
Restriction
4
10 [Administration] Tab
Select whether the SMB protocol is enabled or disabled.
 Enable — Select this to enable SMB.
 Disable — Select this to disable SMB.
Select whether the SMB 1.0 server is enabled or disabled.
 Enable — Select this to enable the SMB 1.0 server.
 Disable — Select this to disable the SMB 1.0 server.
Select whether the SMB 1.0 client is enabled or disabled.
 Enable — Select this to enable the SMB 1.0 client.
 Disable — Select this to disable the SMB 1.0 client.
Specify restrictions on SMB.
 None — Select this to not specify restrictions on SMB.
 Print Share — Select this to enable the file sharing service using SMB, but
disable SMB printing.
 File Share — Select this to enable SMB printing, but disable the file sharing
service using SMB.
Description