Logging In To The Ga-1121 - Toshiba FIERY GA-1121 Management Manual

3
3-2 Using Command WorkStation or Command WorkStation LE
2. Double-click the CWS LE file to start the application.
T
O LOG IN TO THE
1. From the Server menu, choose Log in/Log out (Command WorkStation) or Login/
Login button
When you start Command WorkStation LE for the first time, the server list does not
display any GA-1121 servers. For instructions on configuring and adding GA-1121
servers to the server list, see the

Logging in to the GA-1121

To establish a connection to the GA-1121 listed in the server list, log in to the
GA-1121.
In Command WorkStation, you can maintain connections to more than one GA-1121
at a time. Each GA-1121 connection requires an average of 4MB of RAM. The
maximum number of simultaneous GA-1121 connections is limited only by the
amount of RAM available on the system running Command WorkStation. For
example, if your system has 128MB of RAM and is running Command WorkStation
exclusively, you can log in to approximately 25 GA-1121 servers at one time.
GA-1121
Logout (Command WorkStation LE).
The server list appears. The GA-1121 must appear in the server list before you can log
in to it.
Command WorkStation
User Software Installation Guide.