OPERATION
REMOTE POSITIONER RAISE SET PILOT LAMP
(If equipped)
This lamp (12) lights up, flashes, or goes out when the remote
positioner RAISE stop position is set or the sensor is adjusted.
For details, see "REMOTE POSITIONER (3-101)".
REMOTE POSITIONER LOWER SET PILOT LAMP
(If equipped)
This lamp (13) lights up, flashes, or goes out when the remote
positioner LOWER stop position is set or the sensor is
adjusted.
For details, see "REMOTE POSITIONER (3-101)".
AUTO-GREASING PILOT LAMP
(If equipped)
This lamp (14) shows that auto greasing is being carried out.
The lamp should be lighted up.
If the lamp is flashing, it means that there is lack of grease
inside the grease pump.
For details, see "HANDLING AUTO-GREASING SYSTEM (6-
3)".
If the lamp flashes, charge with grease.
For details, see "METHOD OF CHARGING WITH GREASE (6-
16)".
EXPLANATION OF COMPONENTS
3-19
Need help?
Do you have a question about the WA800-3E0 Series and is the answer not in the manual?