Komatsu WA800-3E0 Series Operation & Maintenance Manual page 316

HANDLING AUTO-GREASING SYSTEM
6. Filling branch lines (Injector - Pin) with grease
Remove cap (11) of filler fitting (10) of injector (9), then fill
the all branch lines with grease by using a hand grease
gun.
7. Check of supply line pressure
Check grease pump pressure gauge (12) and supply
grease line pressure gauge (13).
Supply grease line pressure gauge
Normal value: 20.6 MPa (210 kg/cm
Grease pump pressure gauge
Normal value: 2.06 MPa (21 kg/cm
6-6
2
)
2
)
ATTACHMENTS, OPTIONS
View Z