Configuration; Available Axis Firmware Version; Update Procedure - Toshiba E-STUDIO AS/400 User Manual

Configuration

Available AXIS firmware version

Use the production release version or service release version given in the following
table when using TOSHIBA MFP.
All official firmware releases for the AXIS 5570e are available on AXIS website.
http://www.axis.com/techsup/prtsrv/axis_5570e/firmware.php
Use AXIS 5570e IPDS printing when using TOSHIBA MFP.

Update procedure

Update procedure of the AXIS 5570e firmware using FTP:
AS/400 Print Solution — Configuration
TOSHIBA MFP
e-STUDIO520/600/720/850
e-STUDIO523/603/723/853
e-STUDIO281C/351C/451C
e-STUDIO352/452
e-STUDIO353/453
e-STUDIO202L/232/282
e-STUDIO203L/233/283
e-STUDIO2500C/3500C/
3510C
e-STUDIO165/205
e-STUDIO167/207/237
e-STUDIO2020C/2330C/
2820C/2830C/3520C/3530C/
4520C
e-STUDIO5520C/6520C/
6530C
e-STUDIO283C/353C/453C
1.
Open a Windows command prompt.
2.
Connect to the print server using ftp: Type ftp <ip address>
3.
Enter the user and password: (Default user: root Default
password pass) and press Enter.
4.
Change to binary transfer mode: type bin and press Enter.
5.
Type hash and press Enter.
6.
Type put <filename> FLASH. A stream of hash marks will
appear.
7.
The message "Transfer complete. Flash programming fin-
ished OK. " will appear.
Production release
version
7.08 or later
7.08 or later
7.10 or later
Service release
version
7.06.04 or later
7.08.2 or later
7.08.2 or later
17