Installation; Installation Procedure - Toshiba E-STUDIO AS/400 User Manual

Installation

Installation procedure

Install the AS/400 printing solution in two steps:
1. Set up the hardware
2. Set up the AS/400 printer
Step 1: Set up the hardware
•
NOTE:
14
The controller can be directly connected to the AS/400 network at the same time.
Thus, PCL-based or raw print jobs can be sent to it via the network, bypassing the
AXIS 5570e Print Server device.
1.
Following the product installation instructions that came with
the AXIS 5570e Print Server, setup this device.
2.
Connect the AXIS 5570e Print Server and your equipment
using the USB cable.
3.
Press the TEST button on the AXIS 5570e Print Server to print
a test page to your equipment.
4.
Connect the AXIS 5570e Print Server to the network hub.
AS/400 Print Solution — Installation