Ebc - Ducati PANIGALE V4 Owner's Manual

EBC

The instrument panel displays EBC status through the
"Parameter and level change menu" page 53:
- if the EBC is active, the message "EBC" with the
set intervention level number (1 to 3);
- If EBC is active, but system is in degraded
operation, "EBC" message and the number, "1"
to "3" (flashing);
- when in fault, the "EBC" indication and the red
"Err" message;
- if EBC is disabled, "DTC" and "Off" indication.
The Engine Braking Control (EBC) system controls
engine braking when riding with throttle control
completely closed (both when downshifting and in a
normal cut-off with the same gear engaged, while
braking or not). This system independently adjusts
the throttle valves to ensure a consistent torque goes
back from the wheel to engine during these stages.
The system allows the rider to set "engine brake", the
range being from a maximum engine braking with
system set to OFF and progressively decreasing as
level increases.
72
LO HI
Lap Off
0
RACE
km/h
SETTING MENU
1245
km
TOT
137.4 km
TRIP 1
System is particularly sensitive at high rpm and
sensitivity gradually decreases as soon as engine rpm
decrease.
11:34
11 12
10
9
13
8
14
N
7
15
Gear
6
RPM X 1000
5
4
DSC 2
3 2
EBC 3
1
ABS 3
Fig. 25
A.M.