The main fuse (C) is located on the right side of the
fuse box (B Fig. 255), on solenoid starter (D).
To access it, remove the tank cover (page 279) and
the fuse cap (E). A blown fuse can be identified by
breakage of the inner filament (F).
Important
Switch the ignition key to OFF before replacing
the fuse to avoid possible short-circuits.
Warning
Never use a fuse with a rating other than
specified. Failure to observe this rule may damage
the electric system or even cause fire.
E
F
D
C
Fig. 256
F
Fig. 257
323