Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Orbital Systems Manuals
  4. Bathroom Fixtures
  5. Oas Indo
  6. Manual

Orbital Systems Oas Indo Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Oas Indo Manual
INSTALLATION

Advertisement

loading

Related Manuals for Orbital Systems Oas Indo

Summary of Contents for Orbital Systems Oas Indo

  • Page 1 Oas Indo Manual INSTALLATION...
  • Page 2 (46) not throw this manual away, keep it handy for future reference. KIWA TG 1503 KIWA K100686/01 IAPMO E10059 IAPMO C-11154 IAPMO W-11301 Signed for and on behalf of Orbital Systems AB Place Date Name Position Malmö 2019-08-28 Mehrdad Mahdjoubi This system is certified by IAPMO...
  • Page 3 • Defects caused by faulty maintenance, incorrect installation or a faulty repair. Repairs should be carried out only by Orbital Systems, one of our (46) certified service partners or the customer only when certified.

  • Page 4: Table Of Contents

    S E R V I C E TA B L E O F C O N T E N T S Orbital Systems and our team of expert staff including our certified Installation Overview Service Partners are available to assist you should you require product...

  • Page 5: Installation Overview

    I N S TA L L AT I O N O V E R V I E W (46)
  • Page 6 P R O D U C T M E A S U R E M E N T S 575 mm (147) (46) 1266 mm 440 mm Ø 75 mm 812 mm 145 mm 122 mm 184 mm...
  • Page 7 P R E R E Q U I S I T E S F O R I N S TA L L AT I O N Electrical supply EU-one phase: AC 220-240 V / 50 Hz / 16 A Residual circuit breaker: One per shower required.
  • Page 8 I N S TA L L AT I O N O V E R V I E W Cold and hot water supply Recommended Min: 9 litres/minute 575 mm Recommended Min: 3 bar, maximum 10 bar Electrical supply, power: 230 V/16 A (46) Core Wall Enclosure: HxWxD: 932 x 538 x 145 mm...
  • Page 9 R E C YC L I N G O P T I M I S AT I O N S I T E S U G G E S T I O N S Based on 8 minutes shower (7 minutes recycling) in shower space with underfloor heating.

  • Page 10: Installing The Shower Unit

    I N S TA L L I N G T H E S H O W E R U N I T (46) watch video: https://bit.ly/2QNFVLP...
  • Page 11 C O M P O N E N T O V E R V I E W Hose Connection Indo Core Indo Panel Panel Lock + Magnetic Key Funnel Smart Sensor Unit Sensor Tank Sensor Cable Recirculation Hose Flush Hose Smart Sensor Lock (46) + half thread M4 (3 Hex), x1...
  • Page 12 (46)
  • Page 13 (46) Remove Panel Template and nuts. Install Sensor Cable, Flush Hose and, Recirculation Hose. Make sure the sensor cable goes first.
  • Page 14 (46) Apply lubricant Pull the Sensor cable out to where the contact almost Connect hoses to the Sensor Lock. reaches the end of the sensor tank.
  • Page 15 Half thread M4 (3 Hex) (46) CAUTION. If Sensor Lock is misaligned it can cause issues in further installation steps.
  • Page 16 CAUTION. Make sure the Smart Sensor Unit is inserted horisontally. Insert sensor lock unit into drain Rotate until parallel with drain bowl Do not angle the Smart Sensor. pipe. Twist the Sensor Lock Unit bottom. slightly, and insert it all the way into the pipe.
  • Page 17 CAUTION. Make sure Smart Sensor Unit is inserted correctly. The O-ring should not be visible. CAUTION. Place cable towards the wall of the drain to avoid damage. (46) Insert Sensor Tank and connect Smart Sensor Unit with Sensor Set Sensor Lock to Locked position. Lock.
  • Page 18 (46) Remove transport plugs before installation.
  • Page 19 Insert Core into Core Wall Enclosure and attach safety wire. Keep tilted to enable electrical installation. (46) WARNING. Electrical installation should be performed according to local regulations by a licensed electrician. CAUTION. Make sure that hoses and cables are not pinched.
  • Page 20 CAUTION. Make sure to have correct alignment between key and slot in connectors. (46) M8 Socket Head...
  • Page 21 Provided by customer (46) CAUTION. Install hose connections according to local regulations and adaptations.
  • Page 22 Check Air gap placement. (46) M3 (5.5mm driver) Mount Indo Panel.
  • Page 23 M4 Hex Socket Head (2,5 mm) (46) CAUTION. Risk of damage to panel door if overtightening. Make sure the gasket is placed in the circular groove.
  • Page 24 CAUTION. Make sure to have correct alignment between key and slot in connectors. (46) Adjust Indo Panel angle.
  • Page 25 Adjust M3 (5.5mm driver) (46) Secure Clean surface before attaching bracket.
  • Page 26 Adjust until edge aligned to edge. (46) Adjust until edge aligned with magnet.
  • Page 27 (46) Adjust Indo Panel depth.
  • Page 28 N E X T S T E P CAUTION. The shower will not function without executing following steps. Insert Quartz Glass as instructed in the second half of the 83 - 85 chapter “Cleaning the Quartz Glass”. Set into locked position. Insert UV Lamp as instructed in the second half of the 79 - 82...

  • Page 29: Installing The Shower Head

    I N S TA L L I N G T H E S H O W E R H E A D (46)
  • Page 30 C O M P O N E N T O V E R V I E W Shower Head Wall Mount Shower Head Arm Shower Head (46)
  • Page 31 Cover both ends of the Shower Water Connector with thread sealant to avoid leakage. 2 mm (46) It is recommended to cut the Wall box UNI Push with the LK Wall Box Cutter UNI.
  • Page 32 CAUTION. Screw the Shower Head Wall Mount flush to the wall or leakage may occur. (46) CAUTION. Apply lubricant to PEX hose inside of Shower Head Arm. Shower Head installation completed.

  • Page 33: Installing The Hand Head Diverter

    I N S TA L L I N G T H E H A N D H E A D D I V E R T E R (46)
  • Page 34 C O M P O N E N T O V E R V I E W Diverter valve house Diverter wall plate Diverter knob MC6S M4x8H A2 hexagon screw, x3 Diverter housing cover T25 Screw 32mm (4.8mm) T25 Screw 50mm (5.5mm) (46) Drilling template T8 2.5x8mm screw...
  • Page 35 T25 Screw 50 mm T25 Screw 32 mm Flip this template in case of left side orientation installation. 18 mm Seal holes according to local regulations. (46) CAUTION. It’s important that the PEX hoses are pushed in all the way to ‘stop’ before cutting.
  • Page 36 MC6S M4x8H A2 hexagon screw MC6S M4x8H A2 hexagon screw (46) T8 2.5x8mm screw Use Torx T8 L key tool in kit Hand Head Diverter installation completed.

  • Page 37: Installing The Hand Shower Holder

    I N S TA L L I N G T H E H A N D S H O W E R H O L D E R (46)
  • Page 38 C O M P O N E N T O V E R V I E W Hand shower cover T25 Screw 50mm (5.5mm) Hand shower bracket T25 Screw 32mm (4.8mm) M4x8 Set screw (46)
  • Page 39 T25 Screw 50 mm T25 Screw 32 mm (46) Hand Shower Holder installation completed. Use Torx T8 L key tool in kit Push Hand shower cover into position, use Set screw to lock.

  • Page 40: Installing The Hand Shower

    I N S TA L L I N G T H E H A N D S H O W E R (46)
  • Page 41 C O M P O N E N T O V E R V I E W Hand Shower Shower Hose Sealing Ring (46)
  • Page 42 (46) Hand Shower installation completed.

  • Page 43: Connect Oas To Internet

    C O N N E C T O A S T O I N T E R N E T (46)
  • Page 44 Log out Settings Add Shower WIFI Settings Support Log out Download the Orbital systems iOS app from Apple app store and create an User account. It is recommended to always use the latest available Click “Add shower” and follow instructions. version.
  • Page 45 C E R T I F I E D S P A C E T E C H N O L O G Y...