Horizon Fitness PF-P280 Manual page 13

2-1 Operation Procedure
5.
Pile sheets on feed tray.
- Face printed surface downward.
- Jog well and true up sheets toward
feed roller.
- Place sheets center of feed tray.
6.
Slide both feed guides so that feed
guides slightly touch piled sheets.
- Place support rollers at 10 mm inside
of sheet edge.
7.
Turn stopper handle so that orange mark
sets according to the sheet size.
CAUTION
Stop turning stopper handle when
orange mark comes to 10 mm (0.4") to
the both end. Do not turn any further.
NOTE
When irregular size sheets are folded,
refer to "2-2 Irregular Size Sheet
Folding" (Page 12 to 13).
8.
Raise feed tray lever.
Support Roller
Orange
Mark
9
2. Operation Procedure
Feed Tray
Feed Guides
Stopper
Handle