Horizon Fitness PF-P280 Manual page 17

2-2 Irregular Size Sheet Folding
4.
Press fold edge of sheet firmly.
NOTE
If fold edge of sheet is not pressed
sufficiently, sheet (signature) will not
be folded correctly.
5.
Pile folded sheet on feed tray for second
folding.
- Refer to fold pattern table and pile
sheets properly.
6.
Set stopper position for second folding.
When setting is completed, refer to step
9 and the following (page 9) and fold
sheet.
Pile Direction of Sheets For Second Folding
For Gate Folder
For Accordion Fold
For Letter Fold
For Short Fold
For Parallel Fold
Stopper Position for Second Folding
For Gate Folder - 1/2 of sheet Width
For Accordion Fold - 1/3 of sheet Width
For Letter Fold - 1/3 of sheet Width
For Short Fold - 1/4 of sheet Width
For Parallel Fold - 1/4 of sheet Width
13
2. Operation Procedure