Toshiba e-studio 810 User Manual page 31

9
Enter "\\[Server Name]\[Queue Name]" in the
"Enter a port name" field, and click on [OK].
• The [Server Name] of the port name must be the
server name that you entered for the Server Name of
the Windows Printing Service setting on TopAccess.
The default server name of the GA-1140 printer is "e-
STUDIO810".
• The [Queue Name] of the port name must be a queue
name, direct, hold, or print, on the GA-1140 printer.
Enter a queue depending on how you operate the
printing.
direct - print jobs are sent straight to the printer
without spooling.
hold - print jobs are held until users operate copying
or moving them to the Print queue with the job
management tools.
print - print jobs are spooled to the hard disk in the
GA-1140 printer and print out. Use this queue for a
general printing.
: The Hold queue and Print queue are only available when the PS3 Scan & HDD Upgrade (GE-
1060+GE-1110) is installed.
10
Click on [Close] to close the dialog box.
• The screen returns to the Select Port dialog box.
11
Select the port that you create and click on
[Next].
• The Start Copying Files dialog box appears.
29