Toshiba e-studio 810 User Manual page 107

Insert Page
Enter the page number where the sheet is to be inserted. When "Simplex" is selected from the Printing Method drop down
box, entered page will be printed on the inserted sheet. When "Duplex" is selected from the Printing Method drop down box,
entered page and the next page will be printed on both sides of the inserted sheet.
[Set]
Click on this to save the sheet insertion setting and add it to the Information list.
[Delete]
Select the setting from the Information list and click on this to delete the setting from the Information list.
[Delete All]
Click on this to delete all settings from the Information list.
Information
Saved sheet insertion settings are displayed.
NOTE:
• The Sheet Insertion option is disabled when the Magazine Sort or Magazine Sort + Saddle Stitch is selected using the
Finishing option on the Output tab.
• The selectable values in the Paper Source drop down box vary depending on the optional devices installed on the GA-
1140 and configured on the Options tab.
• "Inserter" can be selected from the Paper Source drop down box only when "Blank" is selected at the Printing Method
drop down box.
• An Attention message is displayed when "Bypass (Short Edge)" or "Bypass (Long Edge)" is selected in the Paper
Source drop down box.
• When you select "Lower Drawer (Tab Paper)" or "Bypass (Tab Paper)" from the Paper Source drop down box, please
specify the Tab Settings option on the Options tab before specifying the media type and paper source on the Output
tab. P116 "Setting the Options Tab"
• If "Blank" is selected while duplex printing is performed, and you enter an even
page (which is printed on the back side of the paper when printing duplex) for
the Insert Page list box setting, the specified page will be blank. The desired
blank sheet is inserted next and the duplex printing continues from the next
page.
• If "Simplex" is selected for duplex printing, the specified page is printed on the
front side of the sheet and back side of the sheet will be blank.
• If "Simplex" is selected while duplex printing is performed, and you enter an
even page (which is printed on the back side of the paper when printing
duplex) for the Insert Page list box setting, the specified page will be blank.
The page is printed on the front side of the inserted sheet and the duplex
printing continues from the next page.
• If "Duplex" is selected while duplex printing is performed, and you enter an
even page (which is printed on the back side of the paper when printing
duplex) for the Insert Page list box setting, the specified page will be blank.
The specified page and the next page are printed on the inserted sheet and the
duplex printing continues from the next page.
5
4
Blank Sheet
Blank
3
2
1
5
4
Blank
3
2
1
6
5
Blank
4
Blank
3
2
1
7
6
5
4
Blank
3
2
1
105