Toshiba e-studio 810 User Manual page 110

Darkness
Enter the percentage of shading for the watermark text. The shading can be set from 0 (lightest) to 100 (darkest) in units of
1%. You can also set the percentage of shading by moving the scroll bar.
Angle
Enter the degree of angle for rotating the watermark text. The angle can be set from -180 to 180 degrees in units of 1
degree. You can also set the degree of angle by moving the scroll bar.
[Save]
Click on this to save the new or edited watermark.
[Cancel]
Click on this to cancel creating a new watermark or editing a watermark and restores the previous screen values.
Watermark Image
2
The image of the new or edited watermark is displayed. You can also adjust the position of the watermark by moving the
horizontal and vertical scroll bars.
Position
3
This permits setting the position of the watermark using numeric values.
X Offset
Enter the horizontal position of the watermark. It can be set from -10.00 to 10.00 inch in units of 0.01 inch (-254.00 to
254.00 mm in units of 0.01 mm).
Y Offset
Enter the vertical position of the watermark. It can be set from -10.00 to 10.00 inch in units of 0.01 inch (-254.00 to 254.00
mm in units of 0.01 mm).
[Center]
Click on this to center the watermark.
108