Toshiba e-studio 810 User Manual page 62

1
Select the printer driver in the Printers folder and click on [File] and select [Properties]
(for Windows 95/98/Me) or [Document Defaults..] (for Windows NT 4.0) or [Printing
References...] (for Windows 2000 and Windows XP).
• The printer drivers properties dialog box appears.
2
Click on the [Options] tab and click on [Option
Settings].
• The Option Settings dialog box appears.
3
Set the options according to the printer's
condition and click on [OK].
SUPPLEMENT:
You can check the optional device
configuration on the GA-1140 using the
TopAccess.
P184 "Checking GA-1140 Copier Status"
Optional Paper Feeder
This sets whether or not the large capacity feeder is installed.
Not installed - Select this when no large capacity feeder is installed.
External LCF - Select this when the Large Capacity Feeder (MP-4003A) is installed.
Finisher
This sets whether or not the finisher is installed.
Not Installed - Select this when no finisher is installed.
Finisher - Select this when the Finisher (MJ-1017) is installed.
Saddle Stitch Finisher - Select this when the Saddle Stitch Finisher (MJ-1018) is installed.
Punch Unit
This sets whether or not the hole punch unit is installed. This can be selected when "Finisher"
60
or "Saddle Stitch Finisher" is selected at "Finisher".