HEIDENHAIN ND 261 Manual page 3

Sorting and Tolerance Check Mode
In this mode, the display value is compared with an upper and a lower limit value.
Status indicators and the trigger signal outputs at the D-sub EXT connection lsee that
section) indicate whether the display value is less than the lower limit, greater than
the upper limit, 01 between the two limit values.
Indicator Meaning
= Measured value is between the limit values
<
Measured value is less than the lower limit value
> Measured value is greater than the upper limit value
Operating parameters for the sorting mode:
l
P17: Sorting on/off
l
PI 8, PI 9: Limit values