Advertisement
a
30°
e
c
f
b
c
a
Tightening torque 7 N·m (0.7 kgf·m, 5.2 lb·ft)
3
1
2
INSTALLING THE INCLUDED PARTS
d
f
a
– 7 –
TIP
Install the handlebar a so that the brake levers e
are at a 30 angle to the handlebar, as shown in the
illustration.
TIP
8 Tighten bolts d evenly in stages, in the order
shown in the illustration.
8 Tighten in such a way that the gaps f above
and below the handlebar holder c are equal.
5. Installing the headlight
Install the headlight a to the bracket b as
shown, then tighten the bolt c to the specified
torque.
TIP
Install in such a way that the headlight points down-
ward from horizontal and shines on the road
approximately 33 feet (10 meters) ahead.
6. Installing the front reflector
Install the front reflector 1 in the position a
shown in the illustration, then tighten it together
with the stay 2 and screw 3.
1
Front reflector
2
Stay
3
Screw
TIP
Adjust so that the front reflector 1 faces straight
ahead, then tighten the screw.
1
B
1
B
1
B
Advertisement
