Advertisement
a
d
Tightening torque 6 N·m (0.6 kgf·m, 4.4 lb·ft)
1
a
b
Tightening torque 2.5 N·m (0.25 kgf·m, 1.8 lb·ft)
a
INSTALLING THE INCLUDED PARTS
INSTALLING THE INCLUDED
PARTS
Tighten the bolts and nuts to the specified
torques. Failure to tighten the bolts and nuts to
the specified torques could prevent proper
operation of the bicycle and make it unsafe to
operate.
TIP
8 Charge the battery pack following the instruc-
8 The letters inside the parts list boxes in the
1. Installing the front fender
b
c
b
1
1
2. Installing the front wheel and fork end
b
– 4 –
WARNING
tions in the owner's manual before starting
installation.
assembly procedures indicate the following:
A: Part in part box 1
B: Part in part box 2
C: Part in part box 3
Loosen the bolts a and lower the stay b until
90.
Secure the stay b to the portion c of the front
fender 1.
Adjust the installation position of the front fender
1 and tighten the bolts a and d to the speci-
fied torques.
Front fender
Remove the spacer b from the front disc cali-
per a.
Give the removed spacer b to the customer,
explaining how it is used.
1
Advertisement
