Advertisement
a
q
8
5
4
1
9
8
5
4
1
9
INSTALLING THE INCLUDED PARTS
7. Installing the bell
1
2
1
2
8. Routing the wires
6
Be sure to route the wires as shown in the illus-
tration. If not, they could interfere with handle-
7
bar operation which could cause loss of
3
control.
2
0
q6
7
3
2
0
– 8 –
Install the bell 1 in the position a shown, then
tighten it with the screw 2.
Bell
Screw
WARNING
Confirm that hoses and wires are routed in
order starting from front to back
Front brake hose 1
Rear brake hose 2
Rear shift wire 3
Front shift wire 4
Headlight lead 5
Switch unit lead 6
Display unit lead 7
Clamp the front brake hose 1 and front shift
wire 4 with the wire clip 8 at the position
shown in the illustration.
Clamp the front shift wire 4 and headlight lead
5 with the plastic locking ties 9 at the position
shown in the illustration.
Clamp the rear brake hose 2, rear shift wire 3
and display unit lead 7 with the plastic locking
ties 0 at the position shown in the illustration.
Clamp the front shift wire 4 and switch unit lead
6 with the wire clip q at the position shown in
the illustration.
1
B
1
B
Advertisement
