Table 5. Minor Alarms - Samsung Verizon SLS-BU102 User Manual

The following table lists minor alarms. The Network Extender will continue to
function, but it may function with reduced performance.

Table 5. Minor Alarms

Error
OVERLOAD
DISK_FULL
MEMORY_FULL
PROCESS_DOWN
ANTENNA_FAIL
TOD_MSG_MISSED
DIGITAL_INPUT_HIGH
DIGITAL_INPUT_LOW
VSWR_FAIL
RX_PATH_FAIL
Verizon 4G LTE Network Extender for Enterprise User Guide VSR 1.2.6 v1.0
© Samsung
Description
The average CPU load has
exceeded a threshold.
Disk usage has exceeded a
threshold.
Memory usage has exceeded
a threshold.
An application block is
deactivated/terminated.
The feeding current to the
antenna side is open/short or
the antenna cable is
dismounted.
The TOD message is not
received from the PTPM.
Digital input power level is
higher than a threshold.
Digital input power level is
lower than a threshold.
Antenna has a fault or antenna
cable is not correctly
connected.
RSSI level is below a
threshold.
Chapter 5 Troubleshooting
Next Step
There is a temporary CPU load alert, but
your device is still functioning correctly.
This alert should clear itself. If the alert
persists for a long time, please check the
number of users on the Connected
Devices page and see the capacity
section of the installation guide.
There is a temporary disk usage alert, but
your device is still functioning correctly.
This alert should clear itself. If the alert
persists, please check the number of
users on the Connected Devices page
and see the capacity section of the
installation guide.
There is a temporary memory usage
alert, but your device is still functioning
correctly. This alert should clear itself. If
the alert persists, please check the
number of users on the Connected
Devices page and see the capacity
section of the installation guide.
There is a temporary process alert, but
your device is still functioning correctly.
No action is needed and the alert should
clear itself.
Your RF antennas may have problems.
Please ensure that your antennas, and
any extension cables, are correctly
installed as described in the installation
guide.
There is a failure preventing your device
from functioning correctly.
There is an RF alert, but your device is
still functioning correctly. No action is
needed.
There is an RF alert, but your device is
still functioning correctly. No action is
needed.
Your antenna system is not functioning
correctly. Please ensure that your
antennas, and any extension cables, are
correctly installed as described in the
user guide. If your issue persists, please
contact Verizon Wireless Customer Care.
There is a RF alert, but your device is still
functioning correctly. No action is
needed.
47