Figure 4. Connection Overview - Samsung Verizon SLS-BU102 User Manual

Figure 4. Connection Overview

The rear of the Network Extender provides access to the WAN port, power port,
and external GPS antenna.
1
2
The Network Extender needs to remain unobstructed to allow proper air flow to
the internal components. Place the unit at least 3 meters (9.8 feet) away from
products that generate electromagnetic radiation.
3
Only use the provided power cord and supply. Using any other power source may
result in damage to the Network Extender.
4
5
6
7
Verizon 4G LTE Network Extender for Enterprise User Guide VSR 1.2.6 v1.0
© Samsung
GPS Antenna Port provides access to the external GPS antenna for removal
and relocation. The connections labelled 1PPS (Pulse per Second) and 10M
(10 MHz) are not used in the product.
Heat Vents provide passive ventilation for the Network Extender and allow
for dissipation of internally generated heat.
DC Power Port provides power to the Network Extender when connected to
the AC power supply and cord (included).
Backhaul (or WAN) Port(B/H) allows you to connect the Ethernet cable
provided to establish secure communication with the Verizon Wireless 4G
LTE network via the Internet. The Backhaul port provides Ethernet
connectivity at 100 Base-TX/1000 Base-T.
RESET Button allows you to reset the device to factory defaults. Use a pen to
push and hold the recessed button for 10 seconds. The STS LED will then
become solid red, indicating that the device is resetting. Any manually
configured parameters will require reconfiguration.
STS LED (state status) indicator provides the current operational status of the
Network Extender. When blinking green, the Network Extender is in
operation. Other system states are indicated below.
LMT Port allows you to connect to the Network Extender Admin Website
(Local) to manage the device settings and view the device status and alarm
status.
Chapter 1 Getting Started
10