Removing An Sd Card; Sd Card Care - Toshiba PSA20 User Manual

Removing an SD card

To remove an SD card, follow the steps below.
1. Click the Safety Remove Hardware icon on the Task Bar.
2. Point to SD card and click.
3. Push in the card and release it to pop the card out slightly.
4. Grasp the card and remove it.
CAUTIONS: 1. Make sure the SD card indicator is out before you

SD card care

CAUTION: Set the write-protect switch to the lock position, if you do not
want to record data.
1. Do not write to an SD card if the battery power is low. Low power could affect
writing accuracy.
2. Do not remove an SD card while read/write is in progress.
3. The SD card is designed so that it can be inserted only one way. Do not try to
force the card into the slot.
Figure 8-4 Removing an SD card
remove the card or turn off the computer's power. If
you remove the card or turn off the power while the
computer is accessing the card you may lose data or
damage the card.
2. Do not remove an SD card while the computer is in
Standby or Hibernation mode. The computer could
become unstable or data in the SD card could be lost.
SD cards
SD
CARD
INDICATOR
SD
CARD
8-5