Toshiba PSA20 User Manual page 166

User's Manual
Some CD/DVDs
run correctly, but
others do not
Cannot write correctly
9-12
Check whether the CD/DVD is dirty. If it is, wipe
it with a clean cloth dipped in water or a neutral
cleaner. See the Media care
for details on cleaning.
The software or hardware configuration may
be causing a problem. Make sure the
hardware configuration matches your software's
needs. Check the CD/DVD's documentation.
Check the type of CD/DVD you are using. The
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD (single/
multi-session), CD-ROM Mode 1,
Mode 2, CD-ROM XA Mode 2
(Form1, Form2), Enhanced CD (CD-
EXTRA), CD-G (Audio CD only),
Addressing Method 2
Check the region code on the DVD. It must
match that on the CD-RW/DVD-ROM drive.
Region codes are listed in the
drives section in Chapter 2, The Grand Tour .
If you have trouble writing, make sure you are
observing the following precautions:
• Use only media recommended by TOSHIBA.
• Do not use the mouse or keyboard during
writing.
• Use only the software supplied with the
computer for recording.
• Do not run or start other software during
writing.
• Do not jar the computer during writing.
section in Chapter 4
Optical media