Battery doesn't
power the computer
as long as expected
RTC Battery
Problem
The following message is displayed:
RTC battery is low or CMOS checksum is inconsistent
Press [F1] key to set Date/Time.
The RTC battery
is discharged
Password
For information on setting and using a password, refer to Chapter 7,
Passwords.
Problem
Cannot enter or
forgot password
Hardware and system checklist
Check the power consumption settings in
TOSHIBA Power Saver Utility. Consider using a
power saving mode.
Procedure
1. Press F1 to start the BIOS setup.
2. Set the system date.
3. Set the system time.
4. Press End to exit the program.
5. When a confirmation dialog box appears,
make sure your settings are correct and
press Y.
6. Restart the computer.
Procedure
If you created a Key FD (diskette), you can use it
to start the computer.
If you did not create a Key FD or cannot use it to
start the computer, contact your dealer.
HW Setup and
9-7