Removing A Sd/Ms/Ms Pro/Sm/Mmc/Xd Card - Toshiba TECRA A4 User Manual

2. 5V Smart Media card is not supported.
3. Two kinds of cards will not work at the same time. Please insert
only one card when using Multiple Digital Media Card Slot.
NOTE: If Windows fail to read the SD/MS/MS Pro/SM/MMC/xD card,
remove it then reinsert it.

Removing a SD/MS/MS Pro/SM/MMC/xD card

To remove the memory card, follow the steps below.
®
1. In Windows XP, open the Safely Remove Hardware icon on the sys-
tem tray and disable the inserted memory card.
2. Grasp the card and remove it.
SD/MS/MS P
MMC/ D
X
Figure 8-6 Removing the inserted memory card
CAUTIONS:1.Make sure the Multiple Digital Media Card Slot indicator
2.Please do not remove the inserted memory card from the
3.Do not turn off or make computer in Standby or Hiberna-
Multiple Digital Media Card Slot
/SM/
RO
CARD
is out before you remove the card or turn off the com-
puter's power. If you remove the card or turn off the
power while the computer is accessing the card you may
lose data or damage the card.
Multiple Digital Media Card Slot while in Standby or in
Hibernation state. If you do, PC may become unstable
or the data in the memory card may be lost.
tion mode during data is being transferred. The com-
puter could become unstable or data would be lost.
8-7