Conditioning - Culligan Iron-Cleer 10" Owner's Manual

There are several conditions that will cause the control to trip a conditioning cycle. The screen displays
REGEN TONITE when the control has signaled for a conditioning cycle. REGENERATING is displayed
while the control is conditioning. The following are conditions that will call for conditioning:
1. When the Soft-Minder® meter has recorded the passage of a predetermined number of gallons.
2. At the preset time, when the number of days without a conditioning cycle is equal
to the conditioning interval (timeclock backup) setting.
3. At the preset time, when REGEN TONITE is selected. The screen displays REGEN TONITE.
4. Immediately, when the REGEN NOW is selected. The screen displays REGENERATING.
5. Immediately, if power to the unit has been off for more than three (3) hours
and time of day has been restored.
6. At the preset time based on DAY-OF-WEEK conditioning setting.
Follow either procedure to bypass the filter or to initiate a manual conditioning
or automatically bypass the filter at the control valve or the remote display.
Delayed Conditioning
Screen Display
FILTERING
JAN-01-18
12:01P
REGEN TONITE
JAN-01-18
12:01P
REGEN OFF
JAN-01-18
12:01P
Immediate Conditioning
Screen Display
FILTERING
JAN-01-18
12:01P
REGEN NOW
JAN-01-18
12:01P
REGENERATING
JAN-01-18
12:01P
Range
At the HOME SCREEN, press
1.
N/A
at least three seconds, then release the button.
2. The first line of the display will toggle
Regen
between FILTERING and REGEN TONITE.
Tonite
Regen 3. To cancel a delayed conditioning cycle,
Off
press and hold the
then release the button. The screen displays
REGEN OFF.
Range
At the HOME SCREEN, press
1.
N/A
at least ten (10) seconds, then release the button.
Regen 2. The first line of the screen displays REGEN NOW.
Now The filter will initiate an immediate conditioning cycle.
N/A
3. The first line of the screen displays REGENERATING.
Changing the Setting
and hold for
for three (3) seconds,
Changing the Setting
and hold for

Conditioning

17
01023188 F 09/19