Cleaning & Maintenance - Stanley ARGON F650 Installation, Servicing And User Operating Instructions

Cleaning and Maintenance
This appliance should be inspected and serviced once a year by a qualified, competent and Gas safe /
rgii registered person. The inspection and maintenance must at least ensure that the appliance is
working correctly and safely.
It is advisable to clean the appliance of any dust and debris before the heating season and especially if
the appliance has not been used for some time. This can be done with a soft brush and a vacuum
cleaner or a damp cloth and if required a non-abrasive cleaning agent. Do not use corrosive or abrasive
substances to clean the appliance.
Annual Service
For the Waterford Stanley Warranty to be valid this stove must be services once a year by a Gas safe /
rgii Qualified Engineer. After an annual service on this stove please complete the record sheet at the
rear of the manual
We recommend changing the following parts every year for the service – see pictures below
1) Pilot Assembly completely at service this includes the 1
nd
2) 2 Thermocouple
These parts are available as a service kit directly from Waterford Stanley
SHROUD FOR
PILOT LIGHT
FIRST
THERMOCOUPLE
SECOND THERMOCOUPLE
MOUNTED AT THE END OF THE BACK
BURNER
18
Installation & Operating Manual for Argon F650 & F900 – Balanced Flue Gas Stoves
PILOT LIGHT
st
Thermocouple, Pilot and Igniter
IGNITER
Natural Gas & LPG Models
PILOT
ASSEMBLY
COMPLETE ON
THE PLATE