Subscribe to Our Youtube Channel
Related Manuals for poolstar Poolex Jetline Platinium 90
Summary of Contents for poolstar Poolex Jetline Platinium 90
- Page 1 PLATINIUM MANUEL D’INSTALLATION ET D’UTILISATION de votre pompe à chaleur www.poolstar.fr...
- Page 2 Warning This heat pump contains a flammable refrigerant R32. Any intervention on the refrigerant circuit is prohibited without a valid authorization. Before working on the refrigerant circuit, the following precautions are necessary for safe work. 1. Work procedure The work must be carried out according to a controlled procedure, in order to minimize the risk of presence of flammable gases or vapors during the execution of the works.
- Page 3 Thank you Dear Customer, Thank you for your purchase and for your confidence in our products. These are the result of many years of research in the field of design and production of heat pumps for swimming pools. Our aim is to provide you with an exceptional high performance quality product.
- Page 4 PLEASE READ CAREFULLY. These installation instructions are an integral part of the product. They must be given to the installer and retained by the user. If the manual is lost, please consult the website: www.poolex.fr The instructions and recommendations contained in this manual should be read carefully and understood since they provide valuable information concerning the heat pump’s safe handling and operation.
-
Page 5: Table Of Contents
Contents 1. General ......................................6 General Terms of Delivery ................................. 6 Safety instructions..................................6 Water treatment ..................................7 2. Description ...................................... 8 Package contents ..................................8 General characteristics ................................8 Technical specifications ................................9 Unit dimensions ..................................10 Exploded view ....................................11 3. -
Page 6: General
1. General General Terms of Delivery All equipment, even if shipped ‘free of carriage and packing’, is dispatched at the consignee’s own risk The person responsible for receiving the equipment must carry out a visual inspection to identify any dam- age to the heat pump during transport (refrigerant system, body panels, electrical control box, frame). -
Page 7: Water Treatment
1. General During use To avoid serious injuries, never touch the fan when it is operating. Keep the heat pump out of the reach of children to avoid serious injuries caused by the heat exchanger’s blades. Never start the equipment if there is no water in the pool or if the circulating pump is stopped. Check the water flow rate every month and clean the filter if necessary. -
Page 8: Description
2. Description Package contents Heat pump Poolex Platinium ✔ 2 hydraulic inlet/outlet connectors (50mm diameter) ✔ This installation and user manual ✔ Condensation draining kit ✔ Winter storage cover ✔ 4 anti-vibration pads (fastenings not supplied) ✔ General characteristics A Poolex heat pump has the following features: CE certification and complies with the RoHS European directive. -
Page 9: Technical Specifications
2. Description Technical specifications Poolex Platinium Test conditions Heating power (kW) 12,2~2,78 15,1~3,47 20,93~5,23 26°C Consumption (kW) 1,79~0,20 2,22~0,261 3,22~0,46 Water 26°C INVERTER MODE 13,3~6,8 13,3~6,8 11,37~6,50 (Coeff. of performance) Heating power (kW) 8,8~2,78 10,6~3,47 14,65~5,23 26°C Consumption (kW) 1,11~0,209 1,34~0,261 1,77~0,46 Water... -
Page 10: Unit Dimensions
2. Description Unit dimensions Dimensions in mm Model Jetline Platinium 90 / 120 / 155 93,5... -
Page 11: Exploded View
2. Description Exploded view 1. Top panel 11. Base frame 2. Back panel 12. Front panel 3. LED indicator 13. Fan protective grille 4. Fan support 14. Control panel 5. Fan blade 15. Evaporator 6. Fan motor 16. Heat exchanger 7. -
Page 12: Installation
3. Installation WARNING: Installation must be carried out by a qualified engineer. This section is provided for information purposes only and must be checked and adapted if necessary according to the actual installation conditions. Pre-requirements Equipment necessary for the installation of your heat pump: Power supply cable suitable for the unit’s power requirements. -
Page 13: Installation Layout
3. Installation Installation layout Heat pump Automated treatment system 4-way valve (salt chlorinator, metering pump) Valve 1 Valve 5 Valve 3 Valve 2 Water outlet Water intake Elevating studs Valve 4 Drain Condensation Circulating Filtration plug draining pump FROM THE POOL TOWARDS THE POOL Valves 1, 2 and 3: Bypass valves Valves 4 and 5: Regulating valves... -
Page 14: Hydraulic Connection
3. Installation WARNING: Installation must be carried out by a qualified engineer. This section is provided for information purposes only and must be checked and adapted if necessary according to the actual installation conditions. Hydraulic connection By-Pass assembly Open valve The heat pump must be connected to the pool by Half-open valve means of a By-Pass assembly. - Page 15 3. Installation By-Pass assembly for one heat pump TOWARDS THE POOL Automated treatment system POOL Filtration + Pump FROM THE POOL Half-open valve Open valve By-Pass assembly for more than one heat pump TOWARDS THE POOL Automated treatment system POOL Filtration + Pump FROM THE POOL Half-open valve...
-
Page 16: Electrical Installation
3. Installation WARNING: Installation must be carried out by a qualified engineer. This section is provided for information purposes only and must be checked and adapted if necessary according to the actual installation conditions. Electrical installation To function safely and maintain the integrity of your electrical system, the unit must be connected to a general electricity supply in accordance with the following regulations: Upstream, the general electricity supply must be protected by a 30 mA differential switch. -
Page 17: Electrical Connection
3. Installation Electrical connection WARNING: The heat pump’s power supply MUST be disconnected before any operation. Please comply with the following instructions to electrically connect the heat pump. Step 1: Detach the electrical side panel with a screwdriver to access the electrical terminal block. Step 2: Insert the cable into the heat pump unit by passing it through the opening provided for that purpose. -
Page 18: Use
4. Use Wired remote control Operating mode Water inlet temperature Clock Water outlet temperature Button: Clock and Timers Button: Operating mode Button: On/Off Operating mode selector Before starting, ensure that the filtration pump is working and that water is circulating through the heat pump. -
Page 19: Heating Mode
4. Use Heating Mode WARNING: Before starting, ensure that the filtration pump is operating correctly. Step 1: Long press to switch on your pump. Step 2: Long press to switch from one mode to another until the Heating Mode is displayed. Step 3: Using buttons select the required temperature (15-40°C). -
Page 20: Cooling Mode
4. Use Cooling Mode WARNING: Before starting, ensure that the filtration pump is operating correctly. Step 1: Long press to switch on your pump. Step 2: Long press to switch from one mode to another until the Cooling Mode is displayed. Step 3: Using buttons select the required temperature (8-28°C). -
Page 21: Eco Silence Mode
4. Use ECO silence Mode WARNING: Before starting, ensure that the filtration pump is operating correctly. Step 1: Long press to switch on your pump. Step 2: Long press to switch from one mode to another until ECO Heating Mode is displayed. Step 3: Select the desired temperature by using the buttons (15-40°C). -
Page 22: Setting The Clock
4. Use Setting the clock Set the system clock to local time, as follows: Step 1: Press to set the time, the hours are blinking. Step 2: Adjust the hours with the buttons Step 3: Press to switch to minutes. Step 4: Adjust the minutes with the buttons Step 5: Press to validate and return to the main screen. -
Page 23: Status Values
4. Use 4.12 Status values The status values can be checked via the remote control by following these steps Step 1: Keep pressing until you enter the settings verification mode. Step 2: Press to check the status values. Status N° Step 3: Press to return to the main screen. -
Page 24: Check System Parameters
4. Use 4.13 Check system parameters The system’s settings can be checked via the remote control by following these steps Step 1 : Keep pressing 3s on until you enter the settings verification mode. Step 2 : Press for see the configured parameters. Step 3 : Press to return to the main screen. - Page 25 4. Use Parameters table N° Description Adjustment range Factory setting Remarks Adjustment of temperature difference before restart 1~18°C 1°C Adjustable Reserved - Do not adjust Reserved Reserved - Do not adjust Reserved Adjusting the cooling temperature 8~28°C 27°C Adjustable Adjusting the heating temperature 15~40°C 27°C Adjustable...
-
Page 26: Operation
5. Operation Operation Conditions of use For the heat pump to operate normally, the ambient air temperature must be between -5°C and 43°C. Recommendations prior to start-up Before activating the heat pump, please: Check that the unit is firmly secured and stable. ✔... -
Page 27: Using The Pressure Gauge
5. Operation Using the pressure gauge The gauge is for monitoring the pressure of the refrigerant contained in the heat pump. The values it indicates can vary considerably, depending on the climate, temperature and atmospheric pressure. When the heat pump is in operation: The gauge’s needle indicates the refrigerant pressure. -
Page 28: Maintenance And Servicing
6. Maintenance and servicing Maintenance and servicing WARNING: Before undertaking maintenance work on the unit, ensure that you have disconnected the electrical power supply. Cleaning The heat pump’s casing must be cleaned with a damp cloth. The use of detergents or other household products could damage the surface of the casing and affect its properties. -
Page 29: Winter Storage
6. Maintenance and servicing Winter storage In the winter months when the ambient temperature is lower than 3°C, a shut-down heat pump must be winterised to avoid any frost damage. Winterising in 4 steps Step 1 Step 2 Disconnect the heat pump Open the By-Pass valve. -
Page 30: Repairs
7. Repairs WARNING: Under normal conditions, a suitable heat pump can heat the water in a swimming pool by 1°C to 2°C per day. It is therefore quite normal to not feel any temperature difference in the system when the heat pump is working. A heated pool must be covered to avoid any loss of heat. -
Page 31: List Of Faults
7. Repairs List of faults Code Fault Possible causes Action Check your water circuit operation and the opening of the By-Pass Insufficient water in heat exchanger valves Flow sensor malfunction Sensor disconnected or defective Reconnect or replace sensor Protection activated when the ambient temperature is too low and Antifreeze protection No intervention is necessary the unit is on standby... -
Page 32: Recycling
8. Recycling Recycling the heat pump Your heat pump has reached the end of its life and you wish to dispose of it or to replace it. Do not throw it in the rubbish bin. A heat pump must be disposed of separately with a view to its reuse, recycling or upgrading. It contains substances that are potentially hazardous to the environment but which will be eliminated or neutralised by recycling. -
Page 33: Warranty
Poolstar company. The guaranteed parts shall be replaced or repaired at Poolstar’s discretion. Defective parts must be returned to our workshops to be covered during the warranty period. The warranty does not cover labour costs or unauthorised replacements. -
Page 34: Appendices
10. Appendices 10.1 Wiring diagrams Poolex Platinium 90 Poolex Platinium 120 / 155... - Page 35 10. Appendices 10.2 Error E20 complement Code Anomalies Causes possibles Actions IPM excessive current IPM module failure Replace the inverter module Compressor failure Compressor failure Replace the compressor Reserved Compressor lack of phase The wire for the compressor break/bad connection Check the wire connection of the compressor DC bus voltage too low Input voltage too low/PFC module failure...
- Page 36 AS S I S TA NC E T E CH N IQ UE www.poolex.fr 03-2020 www.poolstar.fr...
Need help?
Do you have a question about the Poolex Jetline Platinium 90 and is the answer not in the manual?
Questions and answers