Choose A Location For Your Sensor - Microsoft Xbox 360 Manual

Hide thumbs Also See for Xbox 360:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

CHooSe a LoCation For Your SenSor

2 ft–6 ft
(0.6m–1.8m)
For the best play space and sensor
performance, place your sensor between 2
and 6 feet (0.6 and 2 meters) high, the closer
to the low or high limit, the better.
Also:
• Place the sensor on a stable surface.
• Make sure the sensor is aligned with the
center of your TV, and close to the front
edge of the table or shelf.
• Do not put the sensor on your console.
• Do not place the sensor on or in front of a
speaker or a surface that vibrates or
makes noise.
• Keep the sensor out of direct sunlight.
• Do not use near any heat sources. Use the
sensor within its specified operating
temperature range of 41 °F – 95 °F
(5 °C – 35 °C). If the sensor is exposed to an
environment outside its prescribed range,
turn it off and allow the temperature to
stabilize within the specified range before
using the sensor again.
important
Only adjust the sensor location by moving
the base. Do not adjust the sensor viewing
angle by hand, by tilting the sensor on its
base. After setup is complete, let the sensor
motors adjust the viewing angle, or you risk
damaging your sensor.
4
Sold separately*
* Sensor mounting adapter
required for above TV
mounting (sold separately)
WarninG
Arrange all cables and cords so that
people and pets are not likely to trip
over or accidentally pull on them as they
move around or walk through the area.
When the sensor and console are not in
use, you may need to disconnect all
cables and cords from the sensor and
console to keep them out of the reach of
children and pets. Do not allow children
to play with cables and cords.
WarninG
avoid Glare
To minimize eyestrain from glare, try the
following:
• Position yourself at a comfortable
distance from your television or
monitor and the Kinect sensor.
• Place your television or monitor and
Kinect sensor away from light sources
that produce glare, or use window
blinds to control light levels.
• Choose soothing natural light that
minimizes glare and eyestrain and
increases contrast and clarity.
• Adjust your television or monitor
brightness and contrast.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents