Set Up Your Sensor - Microsoft Xbox 360 Manual

Set uP Your SenSor

Connect the Sensor to Your Xbox 360 S Console
To connect to your Xbox 360 S console, simply plug the sensor into the console AUX port.
install the Sensor Software on Your
Console
Your console needs a system update before
you can use it with your Kinect sensor.
To update your console:
Press the console power button.
1
Touch the eject button to open the disc
2
tray.
Insert the supplied disc. The update will
3
install automatically. If it doesn't start
automatically, select the disc tray from the
dashboard (as if you were playing a game
from a disc).
When the installation confirmation
4
message appears, remove the disc and
begin setting up your sensor.
notE
When the console is oriented vertically, make
sure the disc is held in place by the tabs on
the disc tray so that it doesn't fall out.
important
To avoid jamming the disc drive and
damaging discs or the console:
• Remove discs before moving the
console or tilting it between the
horizontal and vertical positions.
• Never use cracked discs. They can
shatter inside the console and jam or
break internal parts.
9