Polycom RealPresence Practitioner Cart 8000 User Manual page 5

Inspect spiral cord before each use. DO NOT USE CORD IF DAMAGED.
Fully insert spiral cord plug into outlet. DO NOT unplug by pulling on cord. DO NOT remove, bend or modify
any metal prongs or pins of spiral cart cord.
DO NOT use excessive force to make connections.
DO NOT ALLOW CORD TO OVERHEAT
DO NOT drive, drag or place objects over spiral cord. Do not stand or walk on spiral cord.
Only authorized personnel, experienced in servicing electrical equipment should open the power system.
Do not use an electrical extension cord with your cart.
Use caution, maintain control of the cart while moving the cart over thresholds.
Symbol
LEAD BATTERY
MUST BE RECYCLED
Manufactured by: Rubbermaid Healthcare • 16905 Northcross Drive • Suite 200 • Huntersville NC 28078
Signal Word Level of Hazard
Indicates a situation that does not present any
IMPORTANT hazard but is very important in maintaining a well
functioning cart.
Consult accompanying document to avoid a
ATTENTION potentially hazardous situation which may result in
minor or moderate injury.
Indicates an impending electrical hazard which, if
ELECTRICAL not avoided, may result in personal injury, fire and/or
death.
Polycom Take Back and
Recycling Program
CART DISPOSAL
Dispose of carts in accordance with local
environmental guidelines and regulations for
waste.If further information is required please
contact:
TakeBack@polycom.com
Polycom RealPresence® Practitioner Cart® 8000 User Manual p/n 1793149 Rev C 03/13
RealPresence
Care should be taken to transport and store this
system within a temperature range of 4 to 131º F
(-20º C to 55º C);; Humidity 0% RH to 90% RH
non-condensing
Operating Environment
Operating Environment parameters for this
system are:
• Temperature 50 to 104°F (10 to 40°C)
• Humidity 0 to 60% RH non-condensing
• Pressure
• Altitude 10000ft (3000m) max.
3
® ®
Practitioner Cart 8000
Transport/Storage
700 hPa to 1060 hPa