Advertisement
!! WARNING !!
MAKE SURE THAT ALL POWER HAS BEEN REMOVED FROM
THE MACHINE BEFORE ATTEMPTING TO INSTALL ANY
HARDWARE OR CABLING!
Preparation
Disconnect the laundry machine from all power sources
before performing any of the following steps.
Installation
1
Place the Side Car enclosure
bottom on top of the Dexter top
cover panel, and line it up as
shown. Mark the location of the
four (4) bottom mounting posts, and
the center hole for drilling.
2
Completely remove the top
cover of the washing machine,
and drill the marked holes to
size. Mount the bottom of the
side-car cover to the machine
top and set it aside.
www.heartlandMicroPayments.com
6
Advertisement
