Advertisement
Installation
15
Connect the 4-position
white connector (it will
have one green wire) of
the WaveReader harness
to the Dexter control
board, at the same place
that the coin-drop was
disconnected from.
16
Connect the 7-position
white connector of the
WaveReader harness
to the Dexter control
board, at the same
place that the coin-
drop was disconnected
from.
Connect the two spade
17
lugs of the secondary side
(thin wires) coming from
the supplied transformer
to their mating ends on
the machine interface
harness.
www.heartlandMicroPayments.com
11
Advertisement
