Advertisement
Installation
21
Secure the
WaveReader to the top
cover with the four (4)
6-32 Philips Pan Head
Locking Screws that
were supplied with the
Side Car Kit.
Connect the large,
22
free end (J1) of the
WaveReader harness
that was pulled
through the hole to
the connector on the
back of the reader.
23
Position the top Side Car
cover so that the two (2)
retaining pins at the back
edge line up with their
mating holes in the bottom
cover. Tap the top cover
down so that the pins are
fully inserted.
www.heartlandMicroPayments.com
13
Advertisement
