Advertisement
Testing
28
Once the unit has been
reassembled, the entire
WaveReader needs to be
tested before being
placed into or returned
to service.
29
2. Verify the machine has recognized the coin and deducted 25c
from the total price.
3. Swipe a card, wait for the transaction to be approved
4. Verify that machine has received all of the funds required
30
Secure all machine panels.
1. Drop 25c into the coin drop.
and then press START on the WaveReader
for a cycle and it is ready to start. Note – the card will be
charged a full cycle price. You are only verifying that the
machine is receiving pulses from both the coin drop and
the card reader, appropriately.
www.heartlandMicroPayments.com
IMPORTANT
The WaveContoller has to be
operating and the machines linked to
it before testing can be performed.
15
Advertisement
