Energy Efficiency - AEG BPK351021M User Manual

Table of Contents

Advertisement

Problem
The water comes out of the
cavity embossment.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. ENERGY EFFICIENCY

14.1 Product Information and Product Information Sheet*
Supplier's name
Possible cause
There is too much water in
the cavity embossment.
The demo mode is activa-
ted.
on the front frame of the oven cavity. Do
not remove the rating plate from the
oven cavity.
.........................................
.........................................
.........................................
Remedy
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with
a cloth or sponge. Add the
correct amount of water to
the cavity embossment. Re-
fer to the specific procedure.
1. Deactivate the oven.
2. Press and hold the but-
ton
.
3. The first digit on the dis-
play and Demo indicator
start to blink.
4. Enter the code 2468 by
pressing the buttons
or
to change the val-
ues and press
firm.
5. The next digit starts to
blink.
6. Demo mode deactivates
when you confirm the
last digit and the code is
correct.
AEG
ENGLISH
33
to con-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents