Table of Contents
Advertisement
AUS
Maintenance, cleaning and servicing/Technical data
Layout/Scope of delivery
ter into the fuel tank opening. Make sure that the filter is seated in the lower corner
of the fuel tank (12). If necessary, use a long screwdriver to move the filter to its
correct position, taking care not to damage it in the process.
8. Securely refit the fuel tank cap (10).
Changing the cutting blade (Fig. 10)
1. Hold the spindle in place with the allen key (26). Use the open end wrench (24) to
remove the flange nut, by turning in an anti-clockwise direction.
2. Remove the flange nut, and cutting blade (8).
NOTE: Ensure that all parts are clean of any dirt or grass prior to fitting.
3. Fit the new cutting blade (8) over the inner flange.
4. Fit the flange nut and tighten firmly using the open end wrench (23) supplied, in a
clockwise direction. Use the allen key (26) to stop the spindle rotating.
IX. TECHNICAL DATA
Engine
Engine power
Engine idling speed
Engine maximum speed
Cutting blade length
Cutting depth
Tank capacity
Mixing ratio (fuel / two-stroke oil)
Subject to technical changes!
10
22
aldi.service.uk@scheppach.com
support@scheppach.com.au
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
MODEL: LE2500P PRODUCT CODE: 61758 09/2018
HTW250/240P
2-Stroke, 25.4 cm
3000±200 min
AFTER SALES SUPPORT
AFTER SALES SUPPORT
00800 4003 4003
LE2500P
3
0.75 kW
-1
9000 min
-1
224 mm
35 mm
0.6 l
40:1
1300 855 831
Hide quick links:
Advertisement
Table of Contents
