Technical Data - ALDI Ferrex GLM44 User Manual

Problem
Unsteady run
The device emits unusual
noises
Insufficient power
Cuttings left on ground
If the problem persists, contact the customer service listed on the last page.

Technical data

Model
Rated voltage/frequency:
Rated power:
Protection class:
IP rating:
Max. rpm:
Weight (net):
Dimensions (H x L x W)
Cutting width:
Possible cause
The selected cutting height is
too low.
Collecting bag is full to the
rim or the discharge chute is
clogged.
Blade is blocked by foreign
object.
Blade is dull or damaged.
Collecting bag is full to the
rim or the discharge chute is
clogged.
Grass is too wet.
GLM44
230–240 V~/50 Hz
1800 W
II
IPX4
3500 min
16.5 kg
1160 × 1180 × 475 mm
440 mm
Troubleshooting
Fault rectification
Set the cutting height 2 levels
higher.
Empty the collecting bag and
remove cuttings from the
discharge chute.
Check the blade
compartment for foreign
objects and remove these if
present.
Check the blade and have it
sharpened or replaced at a
specialist workshop, if
necessary.
Empty the collecting bag and
remove cuttings from the
discharge chute.
Wait for the grass to dry.
-1
19