Summary of Contents for Harbor Breeze CALERA CLRO52-II
Page 1
ITEM #0036261 CALERA CEILING FAN MODEL #00879 UL MODEL #CLRO52-II Harbor Breeze ® is a registered trademark of LF, Español p. 15 LLC. All Rights Reserved. ATTACH YOUR RECEIPT HERE Purchase Date Serial Number Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m.
TABLE OF CONTENTS SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS Safety Information ........................3 Please read and understand this entire manual before attempting to assemble, operate, or install the product. Package Contents ........................4 • When using an existing outlet box, be sure the box is securely attached to the building structure Hardware Contents ......................5 and can support the full weight fo the fan, so as to avoid potential serious injury or death.
PACKAGE CONTENTS HARDWARE CONTENTS (shown actual size) Wire Connector Rubber Gasket Qty. 4 Qty. 1 (NOT TO SCALE) Fan Pull Chain Extension Qty. 1 (NOT TO SCALE) Blade Screw Blade Bracket Screw Qty. 16 Qty. 10 (NOT TO SCALE) (NOT TO SCALE) PREPARATION Before beginning assembly of product, make sure all parts are present.
INITIAL INSTALLATION INITIAL INSTALLATION Install the mounting bracket (A) to the outlet box (not 1. Determine mounting method. included) using the two screws provided with the outlet A-Downrod Mount (normal or angled ceiling) box. Tighten securely. B-Closemount (normal ceiling only) Outlet box Note: If using the angle mount, make sure the open end IMPORTANT: If angle mounting, check to make...
DOWNROD STYLE FAN MOUNTING CLOSEMOUNT STYLE FAN MOUNTING Loosen the two set screws from the yoke. Slip downrod Remove every other screw from the top of the motor (E) into yoke, aligning holes in downrod (E) and yoke. housing assembly (H) -- for a total of 3 screws -- and save.
WIRING FINAL INSTALLATION 1. Connect BLACK and BLUE wires from fan to the Re-install the two screws that were previously removed Supply circuit house BLACK wire. Connect WHITE wire from fan (step 3, page 6) to fully secure the canopy (B) to the Screw Outlet box to the house WHITE wire.
Page 7
FINAL INSTALLATION OPERATING INSTRUCTIONS PULL CHAIN: The fan pull chain is for motor speed control: High, Medium, Low and Off. Pull the Attach blade bracket (F) to the underside of motor chain once for each position. housing assembly (H) using 2 blade bracket screws (EE).
Page 8
For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday. PART DESCRIPTION PART# Blade Bracket 104000-0345 Blade 108003-3046 Printed in China Harbor Breeze is a registered ® trademark of LF, LLC. All rights reserved. Lowes.com/harborbreeze Lowes.com/harborbreeze...
Need help?
Do you have a question about the CALERA CLRO52-II and is the answer not in the manual?
Questions and answers