Accessing Universal Management Services; Administering The Appliance; Maintenance (Date And Time) - IBM TotalStorage Network Attached Storage 300G User Reference

Accessing Universal Management Services

1. You will be prompted to authenticate with administrative user name
2. The UM Services browser will start. In the left pane, Microsoft Windows 2000
3. Again, you will be prompted to authenticate with administrative user name
4. Click Administer this server appliance to bring up the Windows Powered NAS
You are now ready to begin administering the appliance. Details for this task are
described in "Administering the appliance".

Administering the appliance

At this point, you have started the Windows Powered NAS Admin home page and
are ready to make the appliance accessible to the end users. You do this by
adjusting information contained in the following task groups:
v "Maintenance (Date and Time)"
v "Network Setup" on page 5
v "Disks and Volumes" on page 5
v "Users and Groups" on page 5
v "Folders and Shares" on page 6
Although you can modify multiple appliance and network attributes in each task
group, the information given here is the minimum you need to know to administer
the appliance and network.
You can find more information on administration elsewhere in this book and in the
online help.
Note that the icons for the task groups on the administration home page are not in
the same order as presented here.
You can access these task groups in one of three ways:
1. Click the Home tab and then select the task group link.
2. Click the top tab associated with that task group.
3. Click the Back button on your browser until you arrive Home and then select

Maintenance (Date and Time)

In the Maintenance task group, you will need to change the date and time. To do
so, click on Date and Time or the green arrow. (Remember that you can also
access all of these task groups by clicking on the titled tabs at the top of the page.)
The Set Date and Time page appears to allow you adjust information as necessary.
4
300G User's Reference
("Administrator") and password (initially "password", but you will need to change
this later).
If this is the first time you have accessed the UM Services browser (on any
appliance) from this workstation, you will also be prompted to install the Swing
and XML Java libraries in your Web browser.
for NAS will be automatically selected, on the Appliance tab. In the right pane,
Windows 2000 for NAS will start.
("Administrator") and password (initially "password", but you will need to change
this later).
Admin home page.
the task group link.