Instrument Markings - Agilent Technologies PNA Series Installation And Quick Start Manual

Instrument Markings

The instruction documentation symbol. The product is marked with this
symbol when it is necessary for the user to refer to the instructions in the
documentation.
The CE mark is a registered trademark of the European Community.
(If accompanied by a year, it is when the design was proven.)
The CSA mark is a registered trademark of the Canadian Standards
Association.
This ISM device complies with Canadian ICES-001.
ICES/NMB-001
Cet appareil ISM est conforme a la norme NMB-001 du Canada.
This is a symbol of an Industrial Scientific and Medical Group 1
Class A product.
This is a required mark signifying compliance with an EMC requirement.
The C-Tick mark is a registered trademark of the Australian Spectrum
Management Agency.
This product complies with the WEEE Directive (2002/96/EC) marking
requirements. The affixed label indicates that you must not discard this
electrical/ electronic product in domestic household waste.
Product Category: With reference to the equipment types in the WEEE
Directive Annex I, this product is classed as a "Monitoring and Control
instrumentation" product.
Do not dispose in domestic household waste.
To return unwanted products, contact your local Agilent office, or see
http://www.agilent.com/environment/product/ for more information.
The ON and STANDBY symbols are used to mark the positions of the instrument power
line switch.
ON symbol
STANDBY symbol
E8356-90001
Safety, Regulatory, and Environmental Information
Regulatory Information
4-5