4.18 PC card slot
4.18 PC card slot
Removing the PC card slot
To remove the PC card slot, follow the steps below and refer to Figure 4-25.
1. Remove the following screws fixing the PC card slot.
•
2. Remove the PC card slot from the connector CN2110 on the system board.
CN2110
Installing the PC card slot
To install the PC card slot, follow the steps below and refer to Figure 4-25.
1. Connect the PC card slot to the connector CN2110 on the system board and secure it
with the following screws.
•
PORTEGE R200 Maintenance Manual (960-519)
M2×4C
S-FLAT HEAD screw
PC card slot
Figure 4-25 Removing the PC card slot
M2×4C
S-FLAT HEAD screw
4 Replacement Procedures
x2
M2×4C S-FLAT HEAD
x2
[CONFIDENTIAL]
4-37