Toshiba Portege R200 Maintenance Manual page 206

3 Tests and Diagnostics
(b) HDD Priority
Set the priority of the HDD as a startup device.
Built-in HDD→USB The priority is set as built-in HDD→USB (Default)
USB→Built-in HDD
7. Display
This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD+AnalogRGB
NOTE: When starting the computer in Resume mode, the last configuration is
remembered. If data does not appear on the display you are using after starting
in Resume mode, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal
LCD, the external display, both the internal LCD and the external display.
When an external display, which does not support SVGA mode is connected and
"LCD+AnalogRGB" is selected, the external display is not displayed.
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled
Disabled
3-98 [CONFIDENTIAL]
The priority is set as USB memory→built-in HDD.
Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
Selects both the internal LCD and the external monitor
for simultaneous display.
Enables the LCD display stretch feature. (Default)
Disables the LCD display stretch feature.
PORTEGE R200 Maintenance Manual (960-519)
3.29 SETUP