Keyboard - Toshiba Portege R200 Maintenance Manual

4.6 Keyboard

4.6

Keyboard

Removing the keyboard
To remove the keyboard, follow the steps below and refer to Figure 4-8 and 4-9.
CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the
frame and do not touch the keytop.
1. Remove the following screw.
•
2. Turn over the computer and open the display.
3. Insert your nails in the slot of the right topside and left topside of the keyboard
holder and lift it up to remove.
4. Remove the following screws fixing the keyboard.
• M2×2.5C S-FLAT HEAD screw
5. Lift the upper side of the keyboard and turn it face down on the palm rest.
M2×2.5C S-FLAT HEAD
M2×4S BIND
PORTEGE R200 Maintenance Manual (960-519)
M2×4S BIND screw
Keyboard holder
Figure 4-8 Removing the keyboard holder
4 Replacement Procedures
x1
x2
M2×2.5C S-FLAT HEAD
Keyboard
[CONFIDENTIAL] 4-17