FeelElec FY6800 Series User Manual page 5

Main Features:
 Adopt the Direct Digital Synthesizer (DDS) technology and provide stable,
precise, pure and low distortion signals.
 Desktop design with ABS plastic housing, AC 100 - 240V (AC) wide voltage
supply;
 2.4 inch TFT Color LCD with 320×240 resolution, displaying parameters and
graphics of the two channels at the same time.
 The instrument uses 14-bit high-speed D/A converter chip (5Vpp output
quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical
resolution.
 Fully independent dual-channel output (equivalent to two independent signal
sources), able to work synchronously, and the phase difference can be
accurately adjusted;
 Equipped with channel tracking function, when the tracking function is turned
on, all parameters of both channels can be updated according to the user's
configuration at the same time;
 Two or more instruments can synchronize multiple instruments through the
SYNC port;
 Up to 98 sets of function/arbitrary waveforms can be output, including 34 sets
of preset waveforms and 64 sets of user-defined waveforms. Preset
waveforms include: sine wave, square wave (duty ratio adjustable), triangle
wave, pulse wave (preset pulse width and frequency can be precisely set),
rise sawtooth wave, ramp sawtooth wave, staircase wave, trapezoidal pulse
wave, Sink Pulse, narrow pulse, noise, exponential rise, exponential drop,
electrocardiogram, Lorentz pulse, multiple audio waves, CMOS (0~10V),
four-channel TTL level and DC voltage;
 Enable to store 64 arbitrary waveform data files, each one of waveform
storage depth 8192 points * 14bits;
 High frequency accuracy: Frequency accuracy can reach 10
magnitude;
 The frequency resolution is relatively high: the full-range frequency resolution
is 1uHz (0.000001Hz);
 Amplitude resolution is higher: Amplitude resolution can be as low as 1mV
(0.001V);
 With -10V~+10V DC bias function (<20MHz), resolution up to 1mV;
FY6800 Series User's Manual
-6
orders of
5